How to maintain important components of fiber laser cutting machines in hot weather?

When high temperature weather and rainfall exist at the same time, the laser cutting machine is likely to malfunction during use. In order to reduce the occurrence of malfunctions, the editor of men-luck has compiled the maintenance precautions for the important components of the laser cutting machine equipment in high temperature and rainy days. matter.

Prevent condensation on the laser of fiber laser cutting machine:
The laser and optical lenses of laser cutting machines use water cooling, and condensation is easy to form in high-temperature and high-humidity environments. Condensation can cause damage or even malfunction of the laser’s electrical and optical components, thereby reducing the performance of the laser or even damaging it. It is generally recommended that customers set the laser water temperature to 22°-26°. This temperature is set based on the laser light rate and the laser high temperature alarm range. In addition, start-up related work must be carried out in strict accordance with the prescribed operating sequence. The main power and air conditioner of the laser must be started first and run for 30 minutes. Then the supporting chiller must be started. After the water temperature rises to the preset temperature, the laser can be started again. When shutting down, the laser must be turned on first. wall laser, and then turn off the chiller; otherwise, a sudden change in temperature difference between the inside and outside of the laser will also cause condensation.

If condensation accidentally occurs, first stop the machine immediately, then wipe the condensed water on the surface of the laser, and adjust the temperature of the chiller. Only after the condensation is completely eliminated can the laser continue to work. If this problem occurs for a long time, it must be solved fundamentally, such as building an air-conditioned room to maintain a constant temperature environment to avoid condensation.

Lubrication and maintenance of guide rails of fiber laser cutting machines:
As a part of the equipment, the guide rail of the laser cutting machine needs to be wiped clean of dust regularly and lubricated to keep the guide rail clean. If it is a high-temperature area, the viscosity of the engine oil must be appropriately increased. The temperature of grease oil is relatively easy to change, so add oil appropriately to ensure lubrication and no debris; the straightness of the cutting machine table and guide rails and the verticality of the machine must also be maintained; the motor must also be Clean and lubricate regularly, and make timely adjustments if problems are found.

Fiber laser cutting machine cleaning and maintenance
According to the actual working environment, regularly clean the internal space of the cutting hood of the machine to avoid accumulation of metal dust + oil stains + flying sparks, etc. in high temperature weather conditions, otherwise it is easy to cause small dust storms and cause unnecessary losses.

Each component of the fiber laser cutting machine has its inevitable use and different characteristics. Therefore, in terms of maintenance, regular inspection and maintenance must be carried out according to its characteristics and possible problems to ensure the normal operation of the laser cutting machine. and high-quality, high-efficiency production. To learn more about laser cutting machine maintenance and application proofing information, please visit the men-luck official website!